Toggle menu
  1. You are here:
  2. South Holland District Council
  3. /
  4. Resident
  5. /
  6. Housing
  7. /
  8. Housing Standards
  9. /
  10. Disrepairs
  11. /
  12. Damp and mould

Damp and mould

When the weather turns colder, condensation and mould can form more easily. We receive a significant number of reports of mould from October to March. Over the warmer months, there are barely any issues.

What is damp?

There are four main types of dampness that could affect your home. It is important to understand the difference between them. 

1. Rising damp

  • This is caused by water rising from the ground into the home - this will only affect ground floor rooms. Signs include crumbling plaster, "tide mark" low down on ground floor walls and white salts on affected areas. Black mould is rarely seen as building salts are present which prevent the growth of black mould.

2. Penetrating damp

  • This is caused by a defect outside the home, such as missing pointing to the brickwork, faulty guttering, cracked rendering or missing roof tiles. Signs include damp patches on walls or ceilings which darken after rain. Black mould is rarely seen as it is usually too wet and building salts are present which prevent the growth of black mould.

3. Defective plumbing

  • Leaks from water and waste pipes, most common in bathrooms and kitchens. Signs include areas feeling damp to touch and remaining damp regardless of the weather conditions. Black mould is rarely seen as it is usually too wet and detergent is often present which prevents mould growth.

4. Condensation

  • This is caused by moisture in the air in your home turning into water from activities such as cooking, cleaning, bathing and even breathing. Condensation will form on the coldest surfaces in the room first, usually around windows, the corners of the room, and external walls. Condensation mainly occurs during cold weather, regardless of whether it is raining or dry. Black mould is frequently seen on this type of dampness. Signs include water droplets and black mould appearing on colder surfaces such as walls, windows, ceilings or mirrors.  Steps you can take to reduce mould and condensation can be found below.

What is mould?

Mould is a type of fungus that grows and develops in damp or humid conditions where condensation is present. Mould is reduced by keeping your home warm, well ventilated and minimising the amount of moisture that's released into the air within your home. Steps you can take to reduce mould and condensation can be found below.

Steps you can take to reduce condensation and mould:

1. Ventilate your home 

  • Keep trickle vents open at all times
  • Do not block air vents; keep them open at all times.
  • Use extractor fans in kitchens and bathrooms.  If you do not have an extractor fan or it is broken, please contact your landlord. 

 2. Minimise the amount of moisture in your home

  • Dry clothes outside, or in a room (preferably the bathroom) with a window open/extractor fan running, and door closed. Avoid putting wet clothes on a radiator. 
  • Keep lids on saucepans when cooking and ventilate the kitchen with a window open or extractor fan running, and door closed. Wipe away any excess water on tiling and worktops.  
  • Run the extractor fan or open a window when bathing and wipe away any excess water on floors and tiling. Running cold water in the bath before adding hot water reduces condensation.
  • Wipe down condensation from windows and other areas each morning and open the window for a while.
  • Ensure air can circulate freely around the home, including around larger pieces of furniture.

3. Heat your home

  • It's recommended to keep living rooms heated to 21 degrees and keep bedrooms at 18 degrees. You do not have to maintain these temperatures all the time but try to reach them for part of the day.   
  • Ensure your home is evenly heated, to prevent certain rooms becoming too cold and causing condensation
  • The cost of living has increased for everyone. Useful information is available at www.sholland.gov.uk/CostOfLiving.

4. Wipe down patches of mould

  • Use an anti-fungal spray purchased from a hardware store or supermarket and use in accordance with manufacturer's instructions. This helps to limit any spread. You might need to do this at least twice a month in winter. 
  • After treating any mould issues, you might want to redecorate using a fungicidal paint to help prevent recurring mould.

Click on the link Condensation and mould advice for tenants (PDF, 314 KB)(opens new window) for further advice and information regarding damp, condensation and mould.